Crosby® Value Added

Design

The theoretical reserve capability of a hoist hook should be a minimum of 5 to 1 for carbon eye hooks, alloy eye hooks and carbon shank hooks and 4.5 to 1 for alloy shank hooks. Known as the DESIGN FACTOR, it is usually computed by dividing the catalog ultimate load by the working load limit. The ultimate load is the average load or force at which the product fails or no longer supports the load. The working load limit is the maximum mass or force which the product is authorized to support in general service. The design factor is generally expressed as a ratio such as 5 to 1.Also important to the design of hooks is the selection of proper steel.

The Competition

Ask:What is the the design factor?

Ask: Is production lot performance tested?

Crosby hoist hooks meet the design factor requirements of 5 to 1 for all carbon hooks, 5 to 1 for all alloy eye and swivel hooks and 4.5 to 1 for alloy shank hooks. Crosby’s QC 1400 program determines the mechanical properties of each manufacturing lot of hoist hooks. In addition to the heat treat process, Crosby hooks are designed with a cross section that, when overloaded, allows uniform deformation and straightening before ultimate failure.

Quenched and Tempered

Quenching and tempering assures the uniformity of performance and maximizes the properties of the steel. This means that each hook meets its rated strength and other properties. This quenching and tempering process develops a tough material that reduces the risk of a brittle, catastrophic failure, thus improving impact and fatigue properties. As a result, if overloaded, the hook will deform before ultimate failure occurs, thus giving warning. The requirements of your job demand this reliability and consistency. Quench and Tempering insures that not only is the working load limit met, but that ductility, fatigue and impact properties are appropriate.

The Competition

Ask:Are their hooks quenched and tempered?

Ask: Do their shackles have good fatigue life?

Ask: Do their shackles have a fatigue life that meets the new world standards?

Some competitors normalize the hooks, and as a result, desired properties are not achieved. A few even provide hooks in an “as forged” condition, which can result in brittle failure.

Crosby hoist hooks are quenched and tempered. This heat treatment process assures a hook that will deform prior to ultimate failure. Impact and fatigue properties are superior with quenched and tempered hooks. Crosby’s Quenched and Tempered carbon and alloy hoist hooks are recommended for all critical applications, including overhead lifting.

Full Line & Identification

The proper application of hoist hooks requires that the correct type, size, and working load capacity of hook be used. All hooks must be load rated (with either the working load or a cross reference code). In addition the traceability code, size, and manufacturer’s name should be boldly marked on the product. Availability of a full line of eye, shank, and swivel hooks in carbon and alloy steel is essential when selecting the desired hook for the proper application.

The Competition

Ask Do they have a traceability system?

Ask: Does their traceablity system tie into a comprehensive material testing program?

Ask: Does their product offering cover the full range?

Most competitors do not have the full line of hooks that Crosby produces. Most do not have a traceability system.

Crosby forges “Crosby” or “CG,” the Product Identification Code (P.I.C.), and working load limit (or working load cross reference code) into its full line. Crosby’s traceability system and P.I.C. are an integral part of the QC 1400 program.

Application Information

Detailed application information will assist you in the proper selection and use of hoist hooks. This information is most effective when provided in supporting brochures and engineering information. A formal application and warning system that attracts the attention of the user, clearly informs the user of the factors involved in the task, and informs the user of the proper application procedures is needed.

The Competition

Ask: Do they provide hook application and warning information attached directly to the hook?

Ask: What training support is provided? Most competitors do not have a comparable product warnings system and application information for hoist hooks.

The Crosby Product Warnings System provides detailed application and warning information for hoist hooks. In addition, a video on hook maintenance is also available. Field inspection criteria and repair instructions are also available.Training seminars conducted by Crosby provide training on the proper use of hoist hooks. Crosby training packets, supplied free to attendees of Crosby’s seminars, provide training materials needed to explain the proper use of hoist hooks.