Crosby® 320 Eye Hooks

    • All Crosby 320 Eye Hoist Hooks incorporate the following features:
    • The most complete line of Eye hoist hooks.
    • Available in carbon steel and alloy steel.
    • Designed with a 5:1 Design Factor for (Carbon Steel); 4.5:1 Design Factor for 30t - 60t (Alloy Steel).
    • Eye hooks are load rated.
    • Proper design, careful forging and precision controlled quenched and tempering give maximum strength without excessive weight and bulk.
    • Every Crosby Eye Hook has a pre-drilled cam which can be equipped with a latch. Even years after purchase of the original hook, latch assemblies can be added. (See pages 123 - 125)
    • Chemical analysis and tensile tests performed on each PIC to verify chemistry and mechanical properties.
    • Type Approval certification in accordance with ABS 2007 Steel Vessel Rules 1-11-17.7 and ABS Guide for Certification on Cranes available. Certificates available when requested at time of order and may include additional charges.
    • Hoist hooks incorporate two types of strategically placed markings forged into the product which address two (2) QUIC-CHECK® features:
      • Deformation Indicators and Angle Indicators (see following page for detailed definition).

The following additional features have been incorporated in the new Crosby S-320N Eye Hoist Hooks. (Sizes 3/4 metric ton Carbon through 22 metric ton Alloy.)

  • Metric Rated at 5:1 Design Factor for (Carbon Steel); 5:1 Design Factor for 1t - 22t (Alloy Steel).
  • Can be proof tested to 2 times the Working Load Limit.
  • Low profile hook tip.
  • New integrated latch (S-4320) meets the world-class standard for lifting.
    • Heavy duty stamped latch interlocks with the hook tip.
    • High cycle, long life spring.
    • When secured with proper cotter pin through the hole in the tip of hook, meets the intent of OSHA Rule 1926.1431(g) and 1926.1501(g) for personnel hoisting.

Enquiry Form

Our Products